Automatic Motorized Flag Hanging Pull Hanging System Between Buildings and Towers
It is a flag system that is hung between two buildings. It is an automatic motor type and has 2 motor systems. It has 2 panels and each building must have 1 motor and a panel. Our remotely controlled inter-building flag hoisting systems are attached to the engine ropes with flag-lock hooks from the ground. Motors are controlled individually or simultaneously. Thanks to this feature, the difference in building lengths does not pose a problem. The flag is hoisted to the length of the building you want to pull without tension.
The working principle of the flag hanging system between the towers
The ropes descend to the ground when the control system is pressed.
Flag is attached to steel ropes with hooks on the ground.
With the remote control system, it is pulled slowly upwards at the same time or separately according to the situation of the buildings.
Each flag hanging system has a separate remote control receiver card. The most important feature is the PLC control system and the Ardunio processor software and the flag engines communicate with each other between two buildings. When the flag comes to my end switch point, the right motor transmits wireless information to the left motor or the left motor to the right motor.
